Bioaccumulation and depuration of chromium in the selected organs and whole body tissues of freshwater fish Cirrhinus mrigala individually and in binary solutions with nickel

Contamination of aquatic ecosystems with heavy metals has been receiving increased worldwide attention due to their harmful e ects on human health and other organisms in the environment. Most of the studies dealing with toxic e ects of metals deal with single metal species, while the aquatic organisms are typically exposed to mixtures of metals. Hence, in order to provide data supporting the usefulness of freshwater fish as indicators of heavy metal pollution, it has been proposed in the present study to investigate the bioaccumulation and depuration of chromium in the selected organs of freshwater fingerlings Cirrhinus mrigala, individually and in binary solutions with nickel. The results show that the kidney is a target organ for chromium accumulation, which implies that it is also the “critical” organ for toxic symptoms. The results further show that accumulation of nickel in all the tissues of C. mrigala is higher than that of chromium. In addition, the metal accumulations of the binary mixtures of chromium and nickel are substantially higher than those of the individual metals, indicating synergistic interactions between the two metals. Theoretically the simplest explanation for an additive joint action of toxicants in a mixture is that they act in a qualitatively similar way. The observed data suggest that C. mrigala could be suitable monitoring organisms to study the bioavailability of water-bound metals in freshwater habitats.     

Can rare positive interactions become common when large carnivores consume livestock?

Livestock populations in protected areas are viewed negatively because of their interaction with native ungulates through direct competition for food resources. However, livestock and native prey can also interact indirectly through their shared predator. Indirect interactions between two prey species occur when one prey modifies either the functional or numerical responses of a shared predator. This interaction is often manifested as negative effects (apparent competition) on one or both prey species through increased predation risk. But indirect interactions can also yield positive effects on a focal prey if the shared predator modifies its functional response toward increased consumption of an abundant and higher-quality alternative prey. Such a phenomenon between two prey species is underappreciated and overlooked in nature. Positive indirect effects can be expected to occur in livestock-dominated wildlife reserves containing large carnivores. We searched for such positive effects in Acacia-Zizhypus forests of India's Gir sanctuary where livestock (Bubalus bubalis and Bos indicus) and a coexisting native prey (chital deer, Axis axis) are consumed by Asiatic lions (Panthera leo persica). Chital vigilance was higher in areas with low livestock density than in areas with high livestock density. This positive indirect effect occurred because lion predation rates on livestock were twice as great where livestock were abundant than where livestock density was low. Positive indirect interactions mediated by shared predators may be more common than generally thought with rather major consequences for ecological understanding and conservation. We encourage further studies to understand outcomes of indirect interactions on long-term predator-prey dynamics in livestock-dominated protected areas.     

Unraveling the complexities of variation in female mate preference for vertical bars in the swordtail, Xiphophorus cortezi

Investigations into the nature of mate choice suggest that variation in female mate preferences is often context dependent, varying in response to genetic and environmental influences on female condition as well as to external environmental stimuli. Determining whether variation in female mate preference is adaptive requires understanding the variables involved that produce this variation and how they interact. Comparative, multivariate studies of wild-caught adult females can be used as initial assessments of variation in female mate preferences, providing valuable insights into the parameters that influence female preferences under natural conditions. We examined variation in female preferences for the pigment pattern vertical bars across five populations of the swordtail, Xiphophorus cortezi. The populations we examined are genetically differentiated and varied in the frequency of males and females with bars. We also considered a variable indicative of within-individual variation (size, as influenced by age) and a variable that varies across individuals (genotype for vertical bars: barred or barless). Using Akaike information criterion, all candidate models explaining variation in strength of preference included female bar state, female size, and population. We suggest that a combination of genetic (bar state) and environmental (female size) conditions influenced how they responded to experience with both male phenotypes in X. cortezi. Future studies should examine the possibility that barred and barless females respond differently over an environmental gradient.     

Carbon neutral Biggar: calculating the community carbon footprint and renewable energy options for footprint reduction

The objective of this research was to develop a community carbon footprint model that could be used to assess the size and major components of a community’s carbon dioxide (CO₂) emissions. The town of Biggar aims to become Scotland’s first carbon neutral town. As expected for this rural community, car transport accounted for nearly half of the CO₂ emissions, with natural gas and electricity consumption resulting in a further 24% and 12% of total emissions, respectively, and air travel being the last major component at 10% of emissions. An assessment was also made of the wind and solar resources of the town. One large wind turbine would provide the town’s electricity, while three to four turbines would be needed to offset all CO₂ emissions. In contrast, offsetting by tree planting would require in the region of 2,000 ha of trees.

Ash and deposit formation from oxy-coal combustion in a 100 kW test furnace

Ash deposition is still an unresolved problem when retrofitting existing air-fired coal power plants to oxy-fuel combustion. Experimental data are quite necessary for mechanism validation and model development. This work was designed to obtain laboratory combustor data on ash and deposits from oxy-coal combustion, and to explore the effects of oxy-firing on their formation. Two bituminous coals (Utah coal and Illinois coal) and one sub-bituminous coal (PRB coal) were burned on a down-fired combustor under both oxy- and air-firing. Two oxy-fired cases, i.e., 27 vol% O₂/73 vol% CO₂ and 32 vol% O₂/68 vol% CO₂, were selected to match the radiation flux and the adiabatic flame temperature of air combustion, respectively. Once-through CO₂ was used to simulate fully cleaned recycled flue gas. The flue gas excess oxygen was fixed at 3 vol%. For each case, both size-segregated fly ash and bulk fly ash samples were obtained. Simultaneously, ash deposits were collected on an especially designed un-cooled deposition probe. Ash particle size distributions and chemical composition of all samples were characterized. Data showed that oxy-firing had insignificant impacts on the tri-modal ash particle size distributions and composition size distributions in the size range studied. Bulk ash compositions also showed no significant differences between oxy- and air-firing, except for slightly higher sulfur contents in some oxy-fired ashes. The oxy-fired deposits were thicker than those from air-firing, suggesting enhanced ash deposition rates in oxy-firing. Oxy-firing also had apparent impacts on the deposit composition, especially for those components (e.g., CaO, Fe₂O₃, SO₃, etc.) that could contribute significantly to ash deposition. Based on these results, aerodynamic changes in gas flow and changes in combustion temperature seemed more important than chemical changes of ash particles in determining deposit behavior during oxy-coal combustion.     

Bioaccumulation of lead and the influence of chelating agents in Catla catla fingerlings

Lead is a widespread element and one of the persistent and cumulative pollutants of the environment. The present study deals with the bioaccumulation of lead and the influence of chelating agents, meso 2,3-dimercaptosuccinic acid (DMSA), D-Penicillamine and CaNa₂EDTA in reducing the concentration of lead on the selected organs of Catla catla fingerlings for both acute and chronic exposures by using ICP-AES. It is inferred from the present findings that there was a correlation between environmental conditions and the heavy metal contents of the fish. The highest concentration of lead is found in kidney tissues and the lowest in muscle tissues. The accumulation pattern of lead in the selected organs of Catla catla is: kidney > liver > gill > brain > muscle. Also, it has been found that the treatment of chelating agents, DMSA, D-Penicillamine and CaNa₂EDTA reduces the concentration of lead significantly for both acute and chronic exposures. The results also show that DMSA is the most effective chelator of lead in reducing the body burden of C. catla fingerlings. The observed data further indicate that C. catla could be suitable for monitoring organisms to study the bioavailability of water-bound metals in freshwater habitats.     

Can we measure carrying capacity with foraging behavior?

Carrying capacity is one of the most important, yet least understood and rarely estimated, parameters in population management and modeling. A simple behavioral metric of carrying capacity would advance theory, conservation, and management of biological populations. Such a metric should be possible because behavior is finely attuned to variation in environment including population density. We connect optimal foraging theory with population dynamics and life history to develop a simple model that predicts this sort of adaptive density-dependent change in food consumption. We then confirm the model's unexpected and manifold predictions with field experiments. The theory predicts reproductive thresholds that alter the marginal value of energy as well as the value of time. Both effects cause a pronounced discontinuity in quitting-harvest rate that we revealed with foraging experiments. Red-backed voles maintained across a range of high densities foraged at a lower density-dependent rate than the same animals exposed to low-density treatments. The change in harvest rate is diagnostic of populations that exceed their carrying capacity. Ecologists, conservation biologists, and wildlife managers may thus be able to use simple and efficient foraging experiments to estimate carrying capacity and habitat quality.     

Urban Stream Rehabilitation: A Design and Construction Case Study

/ This paper describes the fundamental design features, and construction methods and sequence, of a rehabilitation project on a small suburban creek in Moscow, Idaho, USA. A meandering channel pattern was reestablished for approximately 280 m of straightened, dredged channel, a new floodplain was excavated, and the new riparian zone was replanted. The new stream channel was sized to accommodate an estimated natural bankfull discharge ( approximately 5.6 cms), and floodplain design attempted to match the conveyance of the old enlarged channel (14-20 cms). The project was coordinated by a local nonprofit environmental organization, and the design and construction were tailored to donated materials and a largely volunteer labor force. A high-magnitude flood event (ca. 50-year recurrence interval) six months after construction had no significant impact on the newly constructed channel and revetments, but underscored the need for important detailing of the structures. The use of volunteer labor, while entailing certain benefits, complicates project planning and construction. The most general lesson learned from this project is that sponsoring agencies and clients need to be informed of the many steps and sequencing of properly constructed, complex stream rehabilitation projects as well as the high time and cost requirements for these tasks. KEY WORDS: Stream corridor restoration; Channel design; Streambank revetments     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

Documenting lemming population change in the Arctic: Can we detect trends?

Lemmings are a key component of tundra food webs and changes in their dynamics can affect the whole ecosystem. We present a comprehensive overview of lemming monitoring and research activities, and assess recent trends in lemming abundance across the circumpolar Arctic. Since 2000, lemmings have been monitored at 49 sites of which 38 are still active. The sites were not evenly distributed with notably Russia and high Arctic Canada underrepresented. Abundance was monitored at all sites, but methods and levels of precision varied greatly. Other important attributes such as health, genetic diversity and potential drivers of population change, were often not monitored. There was no evidence that lemming populations were decreasing in general, although a negative trend was detected for low arctic populations sympatric with voles. To keep the pace of arctic change, we recommend maintaining long-term programmes while harmonizing methods, improving spatial coverage and integrating an ecosystem perspective.